From Learn @ Cemetech
Revision as of 17:40, 24 February 2016 by Maintenance script (talk | contribs) (Automated @@ correction)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search


Command Summary

Sets the dimension of a list or lists to 0.

Command Syntax

ClrList list1, [list2, list3, ...]

Menu Location


  1. STAT to access the statistics menu
  2. 4 to select ClrList, or use arrows.

Calculator Compatibility


Token Size

1 byte

ClrList sets the length of a list (or several lists) to 0. This is virtually equivalent to deleting the list, except for two differences:

  • The list still exists -- it will be shown in the memory management menu and the list menu
  • Calling the Dim( command on it will return 0, rather than an error.

In practice, there is rarely a reason to use this command over DelVar.

Advanced Uses

You might use ClrList when building up a list element by element and using dim( in the process:

:ClrList L1
:While 10>dim(L1
:Input X

You may be thinking to yourself, "That is an extremely contrived example!" That's because that is an extremely contrived example. The truth is there is no good reason to use ClrList.


Using DelVar instead of ClrList allows you to save a tiny bit of memory (between 12 and 16 bytes) that ClrList doesn't delete, while keeping almost every aspect of the list clearing the same.

Error Conditions

  • ERR:SYNTAX is thrown if you leave off the symbol when referring to a custom list (i.e., ClrList B will not work; you have to use ClrList ∟B).

Related Commands