Instructions
First, write the name and model of your calculator in the table below, then use this code with an empty line in the "test code here" space to measure your loop overhead.
Add the number of iterations you used to the "iterations" column, and [time taken]/[iterations] to the "average" column. Then subtract your loop overhead from the result and list it in the "time" column.
FnOff
PlotsOff
0→Xmin
94→Xmax
-62→Ymin
0→Ymax
DispGraph //if it is a graphing command
startTmr→θ
Repeat checkTmr(θ
End
For(𝑛,1,[iterations]) //sequence variable 𝑛; note the closing parenthesis.
//test code here
End
checkTmr(θ+1
Math Commands
Unless specified, all variables are equal to 1.
| Command |
Iterations |
Average (ms) |
Loop overhead (ms) |
Time (ms) |
Username
|
| N=I% and FV=PV |
1000 |
4.? |
0.6 |
~4 |
2.55MP/lirtosiast
|
| N+FV[i]=I%+PV[i] |
1000 |
7.? |
0.6 |
~7 |
2.55MP/lirtosiast
|
List/Matrix Commands
Unless specified, all list/matrix elements are equal to 1, and all dimensions are equal to 20.
| Command |
Iterations |
Average (ms) |
Overhead (ms) |
Time (ms) |
Username
|
| L1 |
1000 |
2.? |
0.6 |
~2 |
2.55MP/lirtosiast
|
| not(L1 |
1000 |
9.? |
0.6 |
~9 |
2.55MP/lirtosiast
|
| L1+0 |
1000 |
20 |
0.6 |
~20 |
2.55MP/lirtosiast
|
| cumSum(L1 |
1000 |
19 |
0.6 |
~19 |
2.55MP/lirtosiast
|
| DeltaList(L1 |
1000 |
26 |
0.6 |
~26 |
2.55MP/lirtosiast
|
| augment(L1,L1 |
10000 |
9.4 |
0.6 |
8.8 |
2.55MP/lirtosiast
|
| augment(L1,{1 |
10000 |
7.7 |
0.6 |
7.1 |
2.55MP/lirtosiast
|
| augment({1},L1 //dim=20 |
10000 |
7.7 |
0.6 |
7.1 |
2.55MP/lirtosiast
|
| augment({1},{1 |
10000 |
6.0 |
0.6 |
5.4 |
2.55MP/lirtosiast
|
| DeltaList(L1 //dim=20 |
1000 |
26 |
0.6 |
~26 |
2.55MP/lirtosiast
|
| Fill(1,L1 //dim=20 |
10000 |
3.9 |
0.6 |
3.3 |
2.55MP/lirtosiast
|
Below we can see that using the same variable for the seq( variable as the For( variable doesn't slow anything down. The value of the variable before seq( was called is restored in a constant amount of time.
| Command |
Iterations |
Average (ms) |
Overhead (ms) |
Time (ms) |
Username
|
| seq(1,n,1,20 //loop var n |
1000 |
70 |
0.6 |
70 |
2.55MP/lirtosiast
|
| seq(1,n,1,20 //loop var X |
1000 |
71 |
1.1 |
70 |
2.55MP/lirtosiast
|
| seq(1,X,1,20 //loop var n |
1000 |
82 |
0.6 |
82 |
2.55MP/lirtosiast
|
| seq(1,X,1,20 //loop var X |
1000 |
83 |
1.1 |
82 |
2.55MP/lirtosiast
|
seq( has a large overhead (about 3.5 ms per element), but the penalty doesn't increase by much when the expression inside the seq( is large. Vectorized list operations outside the seq( are only marginally faster than operations inside the seq(.
| Command |
Iterations |
Average (ms) |
Overhead (ms) |
Time (ms) |
Username
|
| seq(1+1,n,1,20 |
1000 |
92 |
0.6 |
92 |
2.55MP/lirtosiast
|
| 1+seq(1,n,1,20 |
1000 |
92 |
0.6 |
92 |
2.55MP/lirtosiast
|
| seq(not(1),n,1,20 |
1000 |
79 |
0.6 |
79 |
2.55MP/lirtosiast
|
| not(seq(1,n,1,20 |
1000 |
76 |
0.6 |
76 |
2.55MP/lirtosiast
|
binomcdf(N-1,0 is often used to construct a list of a certain length N, but binompdf( can be slightly faster. The difference is about equal to the time for a call to cumSum(. When called with a second argument that is not 0 or 1, binompdf( slows down dramatically, by a factor of 60.
| Command |
Iterations |
Average (ms) |
Overhead (ms) |
Time (ms) |
Username
|
| binompdf(19,0 |
1000 |
5 |
0.6 |
5 |
2.55MP/lirtosiast
|
| binomcdf(19,0 |
1000 |
20 |
0.6 |
20 |
2.55MP/lirtosiast
|
| 1 or binompdf(19,0 |
1000 |
16 |
0.6 |
16 |
2.55MP/lirtosiast
|
| binompdf(19,1 |
1000 |
5 |
0.6 |
5 |
2.55MP/lirtosiast
|
| binompdf(19,.5 |
1000 |
296 |
0.6 |
296 |
2.55MP/lirtosiast
|
When using matrix commands, remember that matrix multiplication is O(n^3). It's probably slower than other solutions for large matrices.
| Command |
Iterations |
Average (ms) |
Overhead (ms) |
Time (ms) |
Username
|
| [A]^^T //20x2 |
10000 |
9.3 |
0.6 |
8.7 |
2.55MP/lirtosiast
|
| [A]^^T //2x20 |
10000 |
9.4 |
0.6 |
8.8 |
2.55MP/lirtosiast
|
| [A]^^T //20x20 |
1000 |
62 |
0.6 |
~62 |
2.55MP/lirtosiast
|
Home Screen Commands
| Command |
Iterations |
Average (ms) |
Loop overhead (ms) |
Time (ms) |
Username
|
| ClrHome |
1000 |
29 |
1.2 |
28 |
kgmstwo
|
| Disp " |
1000 |
51 |
1.2 |
50 |
kgmstwo
|
| Output(1,1," |
10000 |
3.8 |
1.2 |
2.6 |
kgmstwo
|
| Output(1,1,"A |
10000 |
4.4 |
1.2 |
3.2 |
kgmstwo
|
| Output(1,1,"AB |
10000 |
5.0 |
1.2 |
3.8 |
kgmstwo
|
| Output(1,1,"ABC |
10000 |
5.6 |
1.2 |
4.4 |
kgmstwo
|
| ClrHome |
1000 |
27 |
.68 |
26 |
kgmstwo
|
Graphics Commands
| Command |
Iterations |
Average (ms) |
Loop overhead (ms) |
Time (ms) |
Username
|
| Pxl-On(0,0 |
10000 |
2.9 |
1.2 |
1.7 |
kgmstwo
|
| Pxl-Off(0,0 |
10000 |
2.9 |
1.2 |
1.7 |
kgmstwo
|
| Pxl-Change(0,0 |
10000 |
2.9 |
1.2 |
1.7 |
kgmstwo
|
| Horizontal -5 |
1000 |
36 |
1.2 |
35 |
kgmstwo
|
| Horizontal -5 |
1000 |
35 |
.68 |
34 |
kgmstwo
|
| Vertical 5 |
1000 |
25 |
1.2 |
24 |
kgmstwo
|
| ClrDraw |
1000 |
101 |
1.2 |
100 |
kgmstwo
|
| StoPic Pic1 |
10000 |
4.7 |
1.2 |
3.5 |
kgmstwo
|
| StoPic Pic1 |
10000 |
4.2 |
.68 |
3.5 |
kgmstwo
|
| RclPic Pic1 |
1000 |
28 |
1.2 |
27 |
kgmstwo
|
| Pt-On(10,-10 |
10000 |
4.1 |
1.2 |
2.9 |
kgmstwo
|
| Pt-On(10,-10 |
10000 |
4.5 |
1.2 |
3.3 |
kgmstwo
|
| Pt-On(10,-10 |
10000 |
4.0 |
.68 |
3.3 |
kgmstwo
|
| :ZStandard:84→Xmin:72→Ymax:ZInteger |
100 |
220 |
.68 |
220 |
kgmstwo
|
| 0->Xmin:1->DeltaX:0->Ymin:1->DeltaY |
1000 |
14 |
.68 |
13 |
kgmstwo
|
| 0->Xmin:94->Xmax:-63->Ymin:0->Ymax |
1000 |
18 |
.68 |
17 |
kgmstwo
|
| Line(5,0,5,-62 |
1000 |
27 |
.68 |
26 |
kgmstwo
|
| Line(5,0,5,-62,0 |
1000 |
27 |
.68 |
26 |
kgmstwo
|
| Line(0,-5,94,-5 |
1000 |
37 |
.68 |
36 |
kgmstwo
|
| Line(0,-5,94,-5,0 |
1000 |
37 |
.68 |
36 |
kgmstwo
|
| Line(10,-10,10,-10 |
10000 |
7.2 |
.68 |
6.5 |
kgmstwo
|
| Line(10,-10,10,-10,0 |
10000 |
7.4 |
.68 |
6.7 |
kgmstwo
|
note: multiple commands always on their own line.
Loop Overheads
| Command |
Average (ms) |
Username
|
| For(n,1,100000) |
.83 |
kgmstwo
|
| For(n,1,100000 |
.69 |
kgmstwo
|
Calculators Used
| Username |
Model |
OS version
|
| kgmstwo |
84+SE |
2.43
|
| lirtosiast |
84+ |
2.55MP
|
